Everest Refrigeration EBGR1 27" One Section Glass Door Upright Reversible Door Reach-In Refrigerator - 18 Cu. Ft.

Everest EBGR1 reach-in refrigerator.

• Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
• Galvanized steel top, bottom and rear.
• 5" thick high density polyurethane insulation.
• Four 5" swivel casters with locks on front set. Leg stabilizers standard for all models.

• Bottom mounted, self-contained, fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
• Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
• Full-length air duct system and airflow guard ensure optimal circulation of cold air.
• Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
• Large capacity, corrosion-resistant condenser and evaporator coils.
• Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
• High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
• Pressure relief devices allow smooth access to cabinet interior when re-opening doors.
• Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.

• Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output.

• Low emissivity double glass panes reflect UV rays for efficient cooling.
• Matte finish aluminum door frames.
• Frame heaters prevent exterior moisture build up.
• Self-closing with adjustable torsion system for a positive seal.
• Snap-in magnetic door gasket make cleaning and replacement an easy process.
• High strength, die-cast door handles.
• Pre-installed door locks keep your items safe from theft (from 2017 production).
• Field reversible.

• Four epoxy coated, steel wire shelves per section.
• Height adjustable stainless steel clips.

• Multi-function digital controller with easy to read LED display.
• Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
• Audible overheat protection alarm for compressor and condenser coil.

Everest EBGR1 Specifications